95G1UH080CE16X - 95% AFUE UH Gas Furnace, Single Stage, 80K BTU, 21" W, Ultra Low NOx, 120/1/60
Product Specifications
Product Specifications
SKU:
95G1UH080CE16X
AFUE:
95
AHRI - Usage:
Indoor AHU
Air Flow Direction:
Upflow / Horizontal
Blower Motor Speeds:
Multiple
Blower Motor Type:
ECM (Electronically Commutated Motor)
Brand:
Heating and Cooling
BTU Input:
80,000
BTU Output:
80,000
Cabinet Width:
21
CFM:
809-1,702
Color:
Gray
Country of Origin:
MEX
Cycle/Hertz:
60 Hz
Energy Star Rated:
Yes
Equipment Type:
Furnace
ERP ID:
439888
ETL Listed:
No
FER Compliant:
No
Filter Size:
20" x 25" x 1" (Bottom), 16" x 25" x 1" (Side)
EPS:
Equipment
Fuel Type:
Natural Gas
Full Load Amps:
8.4
Furnace Type:
Gas
Gas Connection Size:
1/2"
Gas Connection Type:
NPT
Ignition Type:
Hot Surface (HSI)
Includes Filter Rack:
No
Maximum Overcurrent Protection (MOCP):
15
Phase:
Single
Product Family:
95G1EX
Prop 65:
Yes
Substantial Commodity:
Steel; Copper; Aluminum
UL Listed:
No
UOM:
EA
UPC:
662551528473
Voltage:
120 VAC
Weight:
148
Product Documentation
Product Documentation
95% AFUE GAS FURNACE, SINGLE STAGE, CONSTANT TORQUE, ULTRA LOW NOX
95% AFUE gas furnace used for upflow or horizontal applications only, manufactured with aluminized steel tubular heat exchangers. Units are available in heating capacities of 40,000 to 100,000 Btuh and cooling applications up to 5 tons. Units are approved for installations up 7500 feet above sea level and factory equipped for use with natural gas only. Single-stage gas furnace with high efficiency constant torque blower motor which meets the California Ultra Low Nitrogen Oxides (NOx) Standards (14ng/J) and California Seasonal Efficiency requirements. All units use a redundant gas valve to assure safety shut-off as required by C.S.A. All specifications are subject to change without notice.
WARRANTY
10 year limited parts warranty / lifetime heat exchanger warranty available. See limited warranty document for details
95% AFUE gas furnace used for upflow or horizontal applications only, manufactured with aluminized steel tubular heat exchangers. Units are available in heating capacities of 40,000 to 100,000 Btuh and cooling applications up to 5 tons. Units are approved for installations up 7500 feet above sea level and factory equipped for use with natural gas only. Single-stage gas furnace with high efficiency constant torque blower motor which meets the California Ultra Low Nitrogen Oxides (NOx) Standards (14ng/J) and California Seasonal Efficiency requirements. All units use a redundant gas valve to assure safety shut-off as required by C.S.A. All specifications are subject to change without notice.
- CONFIGURATIONS - Upflow / Horizontal
- HEAT EXCHANGER DESIGN - Aluminized steel, tubular primary heat exchanger. Secondary heat exchanger constructed of aluminum fins fitted to stainless steel tubes.
- BURNER - Aluminized steel inshot burners for smooth ignition.
- AIR DELIVERY SYSTEM - Multi-speed high efficiency (constant torque) blower motor. Easily removable slide out blower design. Enhanced cooling SEER ratings when applied with properly matched cooling equipment.
- INSTALLATION FEATURES - Left or right utility connection. Design certified for direct and non-direct vent applications. Zero step horizontal conversion. Removable floor base for bottom return air. Complies with California's South Coast Air Quality Management district Low NOx requirements
WARRANTY
10 year limited parts warranty / lifetime heat exchanger warranty available. See limited warranty document for details
Product Media
Product Media
