97G2UH110CV20 - 97% AFUE, 110 BTUH, 21" W Cabinet, Two Stage Variable Speed Gas Furnace, Upflow/Horizontal, 120/1/60

Product Specifications

SKU:
97G2UH110CV20
AFUE:
97
AHRI - Usage:
Indoor AHU
Air Flow Direction:
Upflow / Horizontal
Blower Motor HP:
1 HP
Blower Motor Speeds:
Variable
Blower Motor Type:
ECM (Electronically Commutated Motor)
Blower Wheel Diameter:
11"
Blower Wheel Width:
11"
Brand:
Heating and Cooling
BTU Input:
72,000-110,000
BTU Output:
70,000-107,000
Cabinet Width:
21
CFM Heating:
935-1,955
Color:
Gray
Country of Origin:
MEX
Cycle/Hertz:
60 Hz
Equipment Type:
Furnace
ERP ID:
444398
ETL Listed:
No
EPS:
Equipment
Fuel Type:
Natural Gas
Full Load Amps:
12.8
Furnace Type:
Gas
Gas Connection Size:
1/2"
Ignition Type:
Hot Surface (HSI)
Phase:
Single
Product Family:
97G2UHV
Prop 65:
Yes
Substantial Commodity:
Steel; Copper; Aluminum
UL Listed:
No
UOM:
EA
Voltage:
120 VAC
Weight:
175

Product Documentation

97G2V TWO STAGE VARIABLE SPEED GAS FURNACE

CONFIGURATIONS
  • Upflow / Horizontal

VENTING
  • 2-speed induced draft motor with stainless steel shaft, steel ball bearings, and fan cooled for long life
  • Vent materials for Canadian applications must comply with ULC S636
  • Certified for direct vent (2-pipe) or non-direct (1-pipe) applications
  • Direct vent refers to a combustion air supply intake pipe installed in conjunction with flue gas vent pipe.

INSTALLATION FEATURES
  • Left or right gas and electric entry
  • Zero step horizontal conversion
  • Removable floor base (upflow/horizontal units) for bottom return air
  • All models comply with California's South Coast Air Quality Management district Low NOx requirements

HEAT EXCHANGER DESIGN
  • Aluminized steel primary heat exchanger with crimped nonwelded construction
  • AL29-4C Stainless steel secondary heat exchanger
  • Non-welded crimped S-curve primary heat exchanger design for maximum durability

BURNERS
  • Aluminized steel in shot burners for smooth ignition
  • Isolated burner enclosure for quiet operation

CABINET CONSTRUCTION
  • Compact 33" height
  • Standardized widths for easy coil fit
  • Unitized construction for cabinet integrity
  • Heat exchanger compartment is insulated to increase efficiency and reduce sound levels
  • Baked on pre painted steel cabinet finish

CONTROLS
  • Two stage gas valve
  • Integrated ignition and fan control
  • System Sentry™ control retains last five (5) fault codes with push button memory recall, regardless of power interruption
  • Hot surface ignition system uses silicon nitride ignitor
  • Control features 120 volt electronic air cleaner and humidifier terminals
  • Control circuit is fuse protected
  • Color coded control wiring
  • Compatible with single or two stage thermostats for heating.
  • Two stage thermostat is recommended when installed with two stage cooling unit.

WARRANTY
  • 10 year limited parts warranty / lifetime heat exchanger warranty available. See limited warranty document for details.

California Only
If installed in South Coast Air Quality Management District (SCAQMD) only: This furnace does not meet the SCAQMD Rule 1111 NOx emission limit (14 ng/J), and thus is subject to a mitigation fee of up to $450. This furnace is not eligible for the Clean Air Furnace Rebate Program: www.CleanAirFurnaceRebate.com.
If installed in San Joaquin Valley Air Pollution Control District (SJVAPCD) only: This furnace does not meet the SJVAPCD Rule 4905 NOx emission limit (14 ng/J), and thus is subject to a mitigation fee of up to $450.


Product Media

View full details