PRPGX1442-072EP - 3 1/2 Ton, 14 SEER Gas Electric Package Unit, Low NOx, Constant Torque, 208-230/1
Product Specifications
Product Specifications
SKU:
PRPGX1442-072EP
AHRI - Usage:
Packaged
Brand:
Heating and Cooling
CBU - Compressor Bearing Unit:
Yes
Color:
Gray
Compressor Type:
Scroll
Condenser Motor Speeds:
1 (Single)
Condenser Motor Type:
PSC (Permanent Split Capacitor)
Cooling Capacity:
42,000
Country of Origin:
USA
Cycle/Hertz:
50/60 Hz
Drain Connection Size:
3/4"
Energy Star Rated:
No
Equipment Type:
Gas Electric
ERP ID:
439917
EPS:
Equipment
Gas Connection Size:
1/2"
Gas Connection Type:
NPT
Phase:
Single
Product Family:
PRPGX14
Prop 65:
Yes
Refrigerant:
R-410A
Substantial Commodity:
Steel; Copper; Aluminum
Tonnage:
3.5
UL Listed:
No
UOM:
EA
UPC:
099273656236
Voltage:
208-230 VAC
Weight:
457
Product Documentation
Product Documentation
PRPGX14 14 SEER GAS ELECTRIC PACKAGED UNIT
REFRIGERANT SYSTEM
HEAT EXCHANGER
CABINET CONSTRUCTION
BLOWER
INSTALLATION
WARRANTY
10 year limited parts and compressor warranty/lifetime heat
exchanger warranty available. See limited warranty document
for details
California Only
This product is not certified to be sold or installed in the South Coast Air Quality Management District (SCAQMD). It does not meet the SCAQMD Rule 1111 NOx emission limit of 14 Ng/J.
This product is not certified to be sold or installed in the San Joaquin Valley Air Pollution Control District (SJVAPCD). It does not meet the SJVAPCD Rule 4905 NOx emission limit of 14 Ng/J.
REFRIGERANT SYSTEM
- Environmentally friendly R410A refrigerant
- Copper tubing with enhanced fin coils
- Internal service gauge ports
- Sleeved distributor tubes
- Antimicrobial insulated drain pan
- High and Low Threaded pressure switches for system protection
HEAT EXCHANGER
- GX models comply with California Energy Commission Low NOx regulations
- Aluminized Tri-Dimple tubular heat exchanger for increased efficiency
- Pest protected flue outlet
CABINET CONSTRUCTION
- Heavy-gauge galvanized steel base rails with rigging holes
- Rounded corners for safety and an attractive, clean appearance
- One piece base design for strength and stability
- Condensate and coil runoff drains to the perimeter of the unit
- Horizontal and downflow duct openings are flanged to minimize water entry
- Low profile, with compact footprint
- Insulation to minimize heat loss plus reduce sound
- Textured pre-painted steel cabinet finish
- Superior service access to components
- Louvered coil guard protection
- One piece "no leak" top design
BLOWER
- Insulated compartment to reduce sound
- Efficient constant torque motor for wide airflow range
- Slide out blower housing for easy service
INSTALLATION
- Horizontal or down discharge capable
- Horizontal and downflow duct covers provided with unit for installation flexibility
- Drain pan float switch monitors condensate level in drain pan and shuts down unit if drain becomes clogged
- Utility connections on "right side"
- Kits enable bottom gas and power entry through base pan
- Seismic Certification (with Seismic Strapping Kit applied): Latest Edition of International Building Code, California Building Code, and ASCE 7-16
WARRANTY
10 year limited parts and compressor warranty/lifetime heat
exchanger warranty available. See limited warranty document
for details
California Only
This product is not certified to be sold or installed in the South Coast Air Quality Management District (SCAQMD). It does not meet the SCAQMD Rule 1111 NOx emission limit of 14 Ng/J.
This product is not certified to be sold or installed in the San Joaquin Valley Air Pollution Control District (SJVAPCD). It does not meet the SJVAPCD Rule 4905 NOx emission limit of 14 Ng/J.
Product Media
Product Media
